Master Room XL305 Tank Repair?

This is where we talk about testing, measuring and repairing things. Sometimes we have to repair the equipment we use to test, measure and repair other things. It's an endless cycle of fixing the broken things we need to fix other broken things.
Post Reply
outoftune
Posts: 2
Joined: Sat Jun 27, 2009 4:03 pm

Master Room XL305 Tank Repair?

Post by outoftune »

Hello, I’m working on a Master Room XL305 output that has dead tank on channel two.

I’ve measure the resistance at the output of both tanks, the good one is 48ohms and the bad channel is reading 0ohms.

Does anyone know if it’s possible to repair what’s inside the tank? and if so is there a procedure to open the tank for repair?

Very nice work on the design of this unit!
 
User avatar
mediatechnology
Posts: 5155
Joined: Sat Aug 11, 2007 2:34 pm
Location: Oak Cliff, Texas
Contact:

Re: Master Room XL305 Tank Repair?

Post by mediatechnology »

I think you should be able to drill open the rivets that hold the two case halves together.

Inside you'll find sled assemblies that look like the pics I posted in the XL-305 thread.
outoftune
Posts: 2
Joined: Sat Jun 27, 2009 4:03 pm

Re: Master Room XL305 Tank Repair?

Post by outoftune »

thank you i will give that a try!
User avatar
mediatechnology
Posts: 5155
Joined: Sat Aug 11, 2007 2:34 pm
Location: Oak Cliff, Texas
Contact:

Re: Master Room XL305 Tank Repair?

Post by mediatechnology »

Post some pics once you get inside.

I should be able to help you find the right type 3 Accutronics sled if it turns out you have a bad transducer.
Post Reply