Page 3 of 3

Re: Wet/dry Parallel Processor

Posted: Sat May 21, 2022 8:39 am
by mediatechnology
Wet Dry Mix Add Parallel Processor PC Board Preview]

I had to take a long break from this project while I assembled some PC boards to replace sold inventory. With that mostly done I've begun the layout.

Image
Wet Dry Mix Add Parallel Processor PC Board Layout

The board is the same size as the MS Mini which is 3.7 x 2.75".

Wet and Dry inputs are on the left.
IC5 and IC6 buffer the Mix/Add pot or stepped switch.
IC7 and IC8 is the summing amp with optional variable make-up gain.
IC9 and IC10 buffer the Mixed output.
RY1 selects Mix/Add.
RY2 provides soft bypass functionality.
J1 and J2 select the bypass input source which can be either the Dry or Wet input.
J3 and J4 when open allow a gain trim pot or switch to control make-up gain.

I need to tweak the layout and check it a bazillion times and conform the schematic to the layout but the hard work is done.
It pays to get away from it for a few hours and then look at it over and over.

Re: Wet/dry Parallel Processor

Posted: Sat May 21, 2022 11:16 am
by mediatechnology
Updated schematic for the Wet Dry Mix Add Parallel Processor

Image
Wet Dry Mix Add Parallel Processor Updated Schematic
Right-click and open a new tab for large format


In order to conserve PC board real estate I removed the passive loop-through connectors for the Dry signal and simplified the gain trim stage.

I'll now check the PC board layout comparing it to the updated schematic.

Re: Wet/dry Parallel Processor

Posted: Mon May 23, 2022 9:06 am
by mediatechnology
First run of boards for the Wet Dry Mix Add are on order.

Re: Wet/dry Parallel Processor

Posted: Thu Jun 02, 2022 1:52 pm
by mediatechnology
Well the boards came in let's see if they run...

Image

Re: Wet/dry Parallel Processor

Posted: Thu Jun 02, 2022 4:52 pm
by mediatechnology
And it runs...

Image

I'll have several of these for sale as bare boards. PM or email me if you're interested.

Re: Wet/dry Parallel Processor

Posted: Tue Jun 14, 2022 5:51 pm
by Fragletrollet
This is so cool! I'm up for a couple of boards 8-)

Re: Wet/dry Parallel Processor

Posted: Tue Jun 14, 2022 6:12 pm
by mediatechnology