Texar Prism clone prototype Finished Version

Where we discuss new analog design ideas for Pro Audio and modern spins on vintage ones.
Posts: 50
Joined: Thu Nov 21, 2019 7:56 am

Re: Texar Prism clone prototype Finished Version

Post by flyboy71 » Sun Oct 10, 2021 1:48 pm

Combined all build guides into one user and construction manual.
TPC100 Manual Rev A.pdf
(2.38 MiB) Downloaded 12 times

"Things are more like they are now then they ever were before" - Dwight

User avatar
Posts: 4894
Joined: Sat Aug 11, 2007 2:34 pm
Location: Oak Cliff, Texas

Re: Texar Prism clone prototype Finished Version

Post by mediatechnology » Thu Oct 14, 2021 1:42 pm

I received my boards and am looking forward to getting started building them!

The quality of the boards and documentation is excellent.
The SMT parts are pre-soldered.

There are 2 BP1 boards:

Ortelligent BP1 Board

A single MB1 I/O board is required:

Ortelligent MB1 Board

4 DS1 boards are required which are supplied on 2 panels. This is one panel containing 4 display drivers.
Jeff supplied an LED alignment jig which will make building the DS1 super-easy.

Ortelligent DS1 Board

I also received a box of pre-programmed processors.
There are 9 total.

Covidland (The Movie) Part 1: Lockdown https://banned.video/watch?id=615f96b3aa816336dbd21792

Directing Orson Welles: "What Is It That You Want?": https://waynekirkwood.com/content/Orson ... u_Want.mp3
Americas Frontline Doctors Lawsuit Motion For Preliminary Injunction Of Covid-19 Vaccine Emergency Use Authorization: https://waynekirkwood.com/images/pdf/Am ... zation.pdf

Post Reply