Texar Prism clone prototype Finished Version

Where we discuss new analog design ideas for Pro Audio and modern spins on vintage ones.
flyboy71
Posts: 49
Joined: Thu Nov 21, 2019 7:56 am

Re: Texar Prism clone prototype Finished Version

Post by flyboy71 » Sun Oct 10, 2021 1:48 pm

Combined all build guides into one user and construction manual.
Attachments
TPC100 Manual Rev A.pdf
(2.38 MiB) Downloaded 11 times
https://ornerscorner.neocities.org/

"Things are more like they are now then they ever were before" - Dwight

User avatar
mediatechnology
Posts: 4888
Joined: Sat Aug 11, 2007 2:34 pm
Location: Oak Cliff, Texas
Contact:

Re: Texar Prism clone prototype Finished Version

Post by mediatechnology » Thu Oct 14, 2021 1:42 pm

I received my boards and am looking forward to getting started building them!

The quality of the boards and documentation is excellent.
The SMT parts are pre-soldered.

There are 2 BP1 boards:

Image
Ortelligent BP1 Board

A single MB1 I/O board is required:

Image
Ortelligent MB1 Board

4 DS1 boards are required which are supplied on 2 panels. This is one panel containing 4 display drivers.
Jeff supplied an LED alignment jig which will make building the DS1 super-easy.

Image
Ortelligent DS1 Board

I also received a box of pre-programmed processors.
There are 9 total.
https://ka-electronics.com

Covidland (The Movie) Part 1: Lockdown https://banned.video/watch?id=615f96b3aa816336dbd21792

Directing Orson Welles: "What Is It That You Want?": https://waynekirkwood.com/content/Orson ... u_Want.mp3
Americas Frontline Doctors Lawsuit Motion For Preliminary Injunction Of Covid-19 Vaccine Emergency Use Authorization: https://waynekirkwood.com/images/pdf/Am ... zation.pdf

Post Reply