Re: Cyril Bateman Capacitor Sound Archive

A resource for technical documentation. Datasheets, application notes, instruction manuals, books and links to resources are found in the Document Library.
User avatar
mediatechnology
Posts: 5437
Joined: Sat Aug 11, 2007 2:34 pm
Location: Oak Cliff, Texas
Contact:

Re: Cyril Bateman Capacitor Sound Archive

Post by mediatechnology »

The Cyril Bateman Capacitor Sound articles featured in the July-December 2002 editions of Electronics World are below.
The jpg scans of the original articles were sent to me some time ago (thanks Peter) and I decided to clean them up and assemble pdfs. Thanks also to ricardo for lighting the fire under me to finish them. They look a little cleaner than the Scribd copies.

Cyril Bateman Capacitor Sound Series Parts 1-5:

Bateman, Electronics World, July 2002, Part 1:
https://www.waynekirkwood.com/images/pd ... Part_1.pdf [6.23M]

Bateman, Electronics World, September 2002, Part 2:
https://www.waynekirkwood.com/images/pd ... Part_2.pdf [6.13M]

Bateman, Electronics World, October 2002, Part 3:
https://www.waynekirkwood.com/images/pd ... Part_3.pdf [5.35M]

Bateman, Electronics World, October 2002, Part 3, Large Figures Published in Part 4:
https://www.waynekirkwood.com/images/pd ... igures.pdf [2.88M]

Bateman, Electronics World, November 2002, Part 4:
https://www.waynekirkwood.com/images/pd ... Part_4.pdf [8.12M]

Bateman, Electronics World, December 2002, Part 5:
https://www.waynekirkwood.com/images/pd ... Part_5.pdf [7.75M]

Notes to Capacitor Sound:

Bateman, Capacitor Sound, Notes Part 1:
https://www.waynekirkwood.com/images/pd ... ound_1.pdf [1.00M]

Bateman, Capacitor Sound, Notes Part 2:
https://www.waynekirkwood.com/images/pd ... ound_2.pdf [1.38M]

Bateman, Capacitor Sound, Notes Part 3:
https://www.waynekirkwood.com/images/pd ... ound_3.pdf [681K]

Bateman, Capacitor Sound, Notes Part 4:
https://www.waynekirkwood.com/images/pd ... ound_4.pdf [611K]

Bateman, Capacitor Sound, Notes Part 5:
https://www.waynekirkwood.com/images/pd ... ound_5.pdf [619K]

Bateman, Capacitor Sound, Notes Part 6:
https://www.waynekirkwood.com/images/pd ... ound_6.pdf [1.08M]

Understanding Capacitors Electronics World 1997/1998 Articles:
Added 4/2017

Bateman, Electronics World, December 1997, Part 1:
https://www.waynekirkwood.com/images/pd ... r_1997.pdf

Bateman, Electronics World, April 1998, Part 2:
https://www.waynekirkwood.com/images/pd ... l_1998.pdf

Bateman, Electronics World, May 1998, Part 3:
https://www.waynekirkwood.com/images/pd ... y_1998.pdf

Bateman, Electronics World, June 1998, Part 4:
https://www.waynekirkwood.com/images/pd ... e_1998.pdf

Bateman, Electronics World, July 1998, Part 5:
https://www.waynekirkwood.com/images/pd ... y_1998.pdf

Bateman, Electronics World, August 1998, Part 6:
https://www.waynekirkwood.com/images/pd ... t_1998.pdf

Other Bateman Articles:

Bateman, Speaker Amp Interaction:
https://www.waynekirkwood.com/images/pd ... action.pdf [5M]

November 27, 2019. Now includes Part 1 and the previously-unpublished Part 2 (begins page 16) courtesy of forum member Ian Hegglun. Ian was helping Cyril proof read the article but it was never published before Cyril died. Ian believes Cyril would have made part 2 available to the public if he could have. Thank you Ian for sending this important unpublished article by Cyril.

Bateman, Simulating Inductor Networks:
https://www.waynekirkwood.com/images/pd ... tworks.pdf

Bateman, Measuring Cables:
https://www.waynekirkwood.com/images/pd ... Cables.pdf

Bateman, Capacitor Misunderstandings:
https://www.waynekirkwood.com/images/pd ... ndings.pdf

:arrow: +1 on ricardo's Elliot Sound Products citation: http://sound.westhost.com/articles/capacitors.htm

http://www.edn.com/electronics-news/438 ... t-circuits
emrr
Posts: 569
Joined: Sun Mar 02, 2008 10:27 pm
Location: NC, USA
Contact:

Re: Cyril Bateman Capacitor Sound Archive

Post by emrr »

great archive!
Best,

Doug Williams
Electromagnetic Radiation Recorders
User avatar
JR.
Posts: 3697
Joined: Sat May 24, 2008 7:21 pm
Contact:

Re: Cyril Bateman Capacitor Sound Website

Post by JR. »

ricardo wrote: NPO/CG0 caps are what I would use unless exact values were required (eg in EQ circuits) In the early 80's at Calrec, when we realised how good they are compared to small polystyrenes, we replaced every single small poly from a 72 channel broadcast desk. This was on the first M-series desk; IMHO, the last of the great analogue desks.
I rather liked the polystyrene dielectric, while the parts weren't very compatible with modern manufacturing processes.

Was your preference for NPO/COG related to size and value accuracy, or something else?

JR
Cancel the "cancel culture", do not support mob hatred.
User avatar
JR.
Posts: 3697
Joined: Sat May 24, 2008 7:21 pm
Contact:

Re: Cyril Bateman Capacitor Sound Archive

Post by JR. »

Wow, good stuff.. I only read a few, but it's nice to hear from a credible voice on the subject who backs up his words with data.

JR

PS: I was only guilty of one cap myth (that ESR is a single value).
Cancel the "cancel culture", do not support mob hatred.
ricardo
Posts: 262
Joined: Sun Apr 10, 2011 7:24 am

Re: Cyril Bateman Capacitor Sound Website

Post by ricardo »

I rather liked the polystyrene dielectric, while the parts weren't very compatible with modern manufacturing processes. Was your preference for NPO/COG related to size and value accuracy, or something else? JR
Calrec desks were all made to order for broadcast orgs. at the time, so no flow soldering etc. But NE5534 poly 22pFs for were forever dying.

What really clinched it for us was doing distribution curves for batches of polys & NPOs (CGO's hadn't been invented 8>D)

If you do a single batch distribution of values on a good 1% resistor, you'll find the curve is well under 0.1% for 2 std. devs. though the mean would not be within 0.1% of nominal.

Similarly for good NPOs. Not quite 0.1% for 2 std. devs. but good enough to do Line Inputs like T2 in

http://www.ka-electronics.com/images/SSL/ssl_82E01.pdf

which easily met BBC & IBA specs for CMR up to supersonic frequencies WITHOUT TRIMS. And more importantly, better practical CMR & RFI performance too. I remember breadboarding the 1st one after heated discussions with Ken Farrar and seeing the CM drop through the floor as my solder joints cooled down.

Small polystyrenes don't have this nice distribution. 1% polys are usually selected so have a +/- 1% flat top distribution.

This is all early 80's. We bought most stuff from FEC & RS in the UK so no Golden Pinnae stuff.

And the other thing we threw out was DIP sockets for OPAs. Makes me wonder about Golden Pinnae pontificating on sound of OPAs. Hmmm.... mm. Maybe I should sell DIP sockets hand carved by virgins from solid BS ....

I do have strong views on electrolytics though. I LIKE nice normal electrolytics (eg Panasonics) with correct voltage across them.
ricardo
Posts: 262
Joined: Sun Apr 10, 2011 7:24 am

Re: Cyril Bateman Capacitor Sound Archive

Post by ricardo »

So more reliable, smaller, more accurate for the purpose, cheaper ... behave like capacitors should .... only thing missing is the "hand carved by virgins from Unobtainium" label.
User avatar
mediatechnology
Posts: 5437
Joined: Sat Aug 11, 2007 2:34 pm
Location: Oak Cliff, Texas
Contact:

Re: Cyril Bateman Capacitor Sound Archive

Post by mediatechnology »

only thing missing is the "hand carved by virgins from Unobtainium" label.
I'll have the art department start on a logo. ;)
User avatar
JR.
Posts: 3697
Joined: Sat May 24, 2008 7:21 pm
Contact:

Re: Cyril Bateman Capacitor Sound Archive

Post by JR. »

ricardo wrote:So more reliable, smaller, more accurate for the purpose, cheaper ... behave like capacitors should .... only thing missing is the "hand carved by virgins from Unobtainium" label.
Thanks, that was my suspicion. Polystyrene manufacture always struck me as a low tech process. I toured one ceramic cap factory (in Mexico) and it was pretty highly automated (despite the low labor cost there) making very consistent parts. The Polystyrene's I've used over the decades always looked hand made.

For RF filters, assuming the poles are relatively high, and their use is mostly JIC, the dielectric shouldn't matter as much. Perhaps some audible IMD is possible from difficult interference.

Not very obvious but those 22pf compensation caps on 5534s are typically forming a pole in the open loop transfer function down at audible frequencies, but linearity of open loop transfer function "should" be of lesser impact unless running out of loop gain margin, which is not good practice.

JR
Cancel the "cancel culture", do not support mob hatred.
MIQ
Posts: 3
Joined: Tue Aug 03, 2010 4:55 pm

Re: Cyril Bateman Capacitor Sound Archive

Post by MIQ »

Wayne,

This is great! Thanks for sharing these. I've been searching for these articles for a while.

-MIKE
User avatar
mediatechnology
Posts: 5437
Joined: Sat Aug 11, 2007 2:34 pm
Location: Oak Cliff, Texas
Contact:

Re: Cyril Bateman Capacitor Sound Archive

Post by mediatechnology »

You're welcome Mike.

Thanks again to Peter V. who sent me the original jpgs from the WW series. Just about everytime I would find links to the originals they'd get broken.
Post Reply