LED Forward Voltage, Vf, Versus Color

A resource for technical documentation. Datasheets, application notes, instruction manuals, books and links to resources are found in the Document Library.
Post Reply
User avatar
mediatechnology
Posts: 4011
Joined: Sat Aug 11, 2007 2:34 pm
Location: Oak Cliff, Texas
Contact:

LED Forward Voltage, Vf, Versus Color

Post by mediatechnology » Sun Dec 16, 2018 10:10 am

This is a quick reference chart of LED forward voltage versus color for those wanting to use LEDs as voltage references.

Red, yellow and green are the colors I've seen used.

Image
LED Forward Voltage, Vf, Versus Color, Image Courtesy Wikipedia

Related reading:

LED Temperature Coefficients When Used as Bias Sources: viewtopic.php?f=12&t=171
https://ka-electronics.com

"There's A War On For Your Mind" Banned.Video https://banned.video/

User avatar
JR.
Posts: 3021
Joined: Sat May 24, 2008 7:21 pm
Contact:

Re: LED Forward Voltage, Vf, Versus Color

Post by JR. » Sun Dec 16, 2018 10:35 am

I've used red before, for a drop used to generate a bias voltage in a later BBD delay kit. It was a little odd to have an LED lit inside the closed unit. The other LED colors were too expensive when I considered this kind of stuff (the red was an relative extravagance) ...

I didn't know that many LED colors exist.

JR

[edit when I looked for cost effective UVc LEDs (200-280 nm) I didn't have much luck (i did find a UVc CFL lamp). /edit]
Don't only half-ass tune your drums. Visit https://circularscience.com to hear what properly "cleared" drums sound like.

Post Reply