Phoenix Connector Terminations

Construction information for DIY projects, including the MS Mid Side Matrix, Elliptic Equalizer, Mastering Console, Phono Transfer System, Insert Switcher and the Dual Class-A Amplifier. You can post your baby pictures here.
Post Reply
User avatar
mediatechnology
Posts: 3661
Joined: Sat Aug 11, 2007 2:34 pm
Location: Oak Cliff, Texas
Contact:

Phoenix Connector Terminations

Post by mediatechnology » Mon Apr 09, 2018 7:32 am

I terminate the shielded twisted pair to three pin male header connections:

Image
Use a multi-pin male header for connections to Phoenix connectors.

That makes connecting and disconnecting the Phoenix connections easier.
https://ka-electronics.com

SOCIAL MEDIA PLATFORMS should advance FREEDOM OF SPEECH. Yet too many Americans have seen their accounts suspended, banned, or fraudulently reported for unclear “violations” of user policies. No matter your views, if you suspect political bias caused such an action to be taken against you, share your story with President Trump.
White House Tech Censorship Reporting Link: https://whitehouse.typeform.com/to/Jti9QH
The Most Banned Network In The World: https://www.infowars.com/show
BANNED VIDEO - UK Police Escort A Muslim Mob To ATTACK Tommy Robinson:https://www.newswars.com/censored-video ... n-england/

User avatar
JR.
Posts: 2684
Joined: Sat May 24, 2008 7:21 pm

Re: Phoenix Connector Terminations

Post by JR. » Mon Apr 09, 2018 3:20 pm

I always thought Phoenix connectors were screw capture loose wire. like Image

That almost looks like an amp/molex whatever header.

JR

User avatar
mediatechnology
Posts: 3661
Joined: Sat Aug 11, 2007 2:34 pm
Location: Oak Cliff, Texas
Contact:

Re: Phoenix Connector Terminations

Post by mediatechnology » Mon Apr 09, 2018 3:26 pm

They are Molex Centigrid-III headers.

You insert the header into the Phoenix connector and use it as a ferule.

Image

If the crimp tools for Molex KK or Centrigrid-III weren't $400 each I would use them.
Phoenix are more DIY-friendly.
https://ka-electronics.com

SOCIAL MEDIA PLATFORMS should advance FREEDOM OF SPEECH. Yet too many Americans have seen their accounts suspended, banned, or fraudulently reported for unclear “violations” of user policies. No matter your views, if you suspect political bias caused such an action to be taken against you, share your story with President Trump.
White House Tech Censorship Reporting Link: https://whitehouse.typeform.com/to/Jti9QH
The Most Banned Network In The World: https://www.infowars.com/show
BANNED VIDEO - UK Police Escort A Muslim Mob To ATTACK Tommy Robinson:https://www.newswars.com/censored-video ... n-england/

Gold
Posts: 500
Joined: Sat Dec 01, 2007 6:20 pm

Re: Phoenix Connector Terminations

Post by Gold » Mon Apr 09, 2018 3:52 pm

You can use a generic barrel crimper for Molex KK. So more like $20 on the bay. I’m not a big fan of Molex KK. When the connector is seated it still can move around a bit. That makes me nervous. I love the Phoenix connectors. I replace Molex KK with phoenix connectors whenever I can. The relay switcher I have used the type above where the wires are secured by screws to the female part of the connector.

Gold
Posts: 500
Joined: Sat Dec 01, 2007 6:20 pm

Re: Phoenix Connector Terminations

Post by Gold » Mon Apr 09, 2018 4:02 pm

I get ferrules from McMaster-Carr. They are much less expensive than Mouser for some reason.
https://www.mcmaster.com/?m=true%20Forc ... s/=1ccblw5

I use a Wiha crimp pliers
https://www.wihatools.com/softgrip-crimping-pliers

User avatar
JR.
Posts: 2684
Joined: Sat May 24, 2008 7:21 pm

Re: Phoenix Connector Terminations

Post by JR. » Mon Apr 09, 2018 4:14 pm

Gotcha,,, neater and faster than tinned wire leads for bench work.

JR

User avatar
mediatechnology
Posts: 3661
Joined: Sat Aug 11, 2007 2:34 pm
Location: Oak Cliff, Texas
Contact:

Re: Phoenix Connector Terminations

Post by mediatechnology » Mon Apr 09, 2018 4:37 pm

I'm not crazy about the Molex KK either.
I've had to repair bad crimps in a lot of commerically-produced gear using them.

I started using the headers for my test jigs.
https://ka-electronics.com

SOCIAL MEDIA PLATFORMS should advance FREEDOM OF SPEECH. Yet too many Americans have seen their accounts suspended, banned, or fraudulently reported for unclear “violations” of user policies. No matter your views, if you suspect political bias caused such an action to be taken against you, share your story with President Trump.
White House Tech Censorship Reporting Link: https://whitehouse.typeform.com/to/Jti9QH
The Most Banned Network In The World: https://www.infowars.com/show
BANNED VIDEO - UK Police Escort A Muslim Mob To ATTACK Tommy Robinson:https://www.newswars.com/censored-video ... n-england/

Gold
Posts: 500
Joined: Sat Dec 01, 2007 6:20 pm

Re: Phoenix Connector Terminations

Post by Gold » Mon Apr 09, 2018 4:50 pm

JR. wrote:
Mon Apr 09, 2018 4:14 pm
Gotcha,,, neater and faster than tinned wire leads for bench work.

JR
If you leave the wire bare the strands spread when you tighten the screw making poor contact. If you tin the wire it becomes brittle and easily breaks. The ferrules allow good contact and provide strain relief.

User avatar
mediatechnology
Posts: 3661
Joined: Sat Aug 11, 2007 2:34 pm
Location: Oak Cliff, Texas
Contact:

Re: Phoenix Connector Terminations

Post by mediatechnology » Mon Apr 09, 2018 5:08 pm

If you leave the wire bare the strands spread when you tighten the screw making poor contact. If you tin the wire it becomes brittle and easily breaks. The ferrules allow good contact and provide strain relief.
And if you do either of those things more than once the conductors look really torn up and mangled.
https://ka-electronics.com

SOCIAL MEDIA PLATFORMS should advance FREEDOM OF SPEECH. Yet too many Americans have seen their accounts suspended, banned, or fraudulently reported for unclear “violations” of user policies. No matter your views, if you suspect political bias caused such an action to be taken against you, share your story with President Trump.
White House Tech Censorship Reporting Link: https://whitehouse.typeform.com/to/Jti9QH
The Most Banned Network In The World: https://www.infowars.com/show
BANNED VIDEO - UK Police Escort A Muslim Mob To ATTACK Tommy Robinson:https://www.newswars.com/censored-video ... n-england/

Post Reply