THAT application page/DEMO board vs pico compressor?

Where we discuss new analog design ideas for Pro Audio and modern spins on vintage ones.
Post Reply
777funk
Posts: 1
Joined: Mon Apr 14, 2014 10:17 am

THAT application page/DEMO board vs pico compressor?

Post by 777funk »

I stumbed across a THAT demo board for their compressor chip that I picked up used for $40 or so. I tested it and it didn't sound too good and was difficult to use. I think the pots (trimmers in this case) were unreliable. I'll replace with real pots and try again when I get time.

Anyways I'm curious if the DEMO board is a similar setup to the pico. I looked a little and couldn't find a schematic for the pico compressor.

thanks!
User avatar
mediatechnology
Posts: 5444
Joined: Sat Aug 11, 2007 2:34 pm
Location: Oak Cliff, Texas
Contact:

Re: THAT application page/DEMO board vs pico compressor?

Post by mediatechnology »

Hi funk777. Thanks for joining us here.

I've made Roger Foote, the designer of the Pico Compressor, aware of your question.
Post Reply