I stumbed across a THAT demo board for their compressor chip that I picked up used for $40 or so. I tested it and it didn't sound too good and was difficult to use. I think the pots (trimmers in this case) were unreliable. I'll replace with real pots and try again when I get time.
Anyways I'm curious if the DEMO board is a similar setup to the pico. I looked a little and couldn't find a schematic for the pico compressor.
thanks!
THAT application page/DEMO board vs pico compressor?
- mediatechnology
- Posts: 5466
- Joined: Sat Aug 11, 2007 2:34 pm
- Location: Oak Cliff, Texas
- Contact:
Re: THAT application page/DEMO board vs pico compressor?
Hi funk777. Thanks for joining us here.
I've made Roger Foote, the designer of the Pico Compressor, aware of your question.
I've made Roger Foote, the designer of the Pico Compressor, aware of your question.