Checkout the Aurora 18×18 Kit and PCB with audio interface.
http://www.theledart.com/blog/archives/734
Do you suppose the firmware could be modified for a vectorscope/goniometer?
Tech stuff here: http://www.theledart.com/blog/wp-conten ... c-rev2.pdf
Cool LED Art - A Blinky LED Thing for JR Using a PIC
- mediatechnology
- Posts: 5466
- Joined: Sat Aug 11, 2007 2:34 pm
- Location: Oak Cliff, Texas
- Contact:
Re: Cool LED Art - A Blinky LED Thing for JR Using a PIC
You'd need to MUX it one more time... they are muxing the three colors by 9 columns, but 18 rows of LEDs are all in parallel.
They also use pretty crude direct dive, with discrete buffers... I push serial data to driver/latches. While I only address 3x12 LEDs in my current piece., or 4x16 in that console meter I did.
Of course you can do anything with a micro but, that one only gets you part way there...and not very far down the path.
JR
They also use pretty crude direct dive, with discrete buffers... I push serial data to driver/latches. While I only address 3x12 LEDs in my current piece., or 4x16 in that console meter I did.
Of course you can do anything with a micro but, that one only gets you part way there...and not very far down the path.
JR
Cancel the "cancel culture", do not support mob hatred.
- mediatechnology
- Posts: 5466
- Joined: Sat Aug 11, 2007 2:34 pm
- Location: Oak Cliff, Texas
- Contact:
Re: Cool LED Art - A Blinky LED Thing for JR Using a PIC
You know I never had one of those funky 70s-era "color organs."
Remember the old Radio Shack and Allied Electronics color organ kits?
I can stare at Winamp's visualization for hours so you can understand why I might be drawn like a moth to one of these things.
Remember the old Radio Shack and Allied Electronics color organ kits?
I can stare at Winamp's visualization for hours so you can understand why I might be drawn like a moth to one of these things.
Re: Cool LED Art - A Blinky LED Thing for JR Using a PIC
With RGB LEDS, just set up an X by Y matrix and make a color TV picture...
JR
JR
Cancel the "cancel culture", do not support mob hatred.
- mediatechnology
- Posts: 5466
- Joined: Sat Aug 11, 2007 2:34 pm
- Location: Oak Cliff, Texas
- Contact:
Re: Cool LED Art - A Blinky LED Thing for JR Using a PIC
Or just buy a 60" monitor and run Winamp.
Looked like his kit required a lot of 0603 soldering.
Looked like his kit required a lot of 0603 soldering.