Search found 11 matches

by benewell
Thu Nov 22, 2018 10:44 pm
Forum: Build
Topic: KA Electronics Mastering Boards Showcased at AES 145 Custom Gear Show
Replies: 2
Views: 12367

Re: KA Electronics Mastering Boards Showcased at AES 145 Custom Gear Show

Thank you for the kind words Wayne! It was a pleasure to present this console to showcase my work and your boards at this years AES. I'm incredibly thankful for the opportunity and was happy to present along side my friends in the Audio Builders Workshop at the Custom Gear Show. If anyone would like...
by benewell
Wed Sep 12, 2018 11:49 am
Forum: Build
Topic: MTC-MS-II Mid Side Matrix Construction Information
Replies: 24
Views: 105952

Re: MTC-MS-II Mid Side Matrix Construction Information

Thank you for the kind words Sylvain!

I used NKK's HB Series of Illuminated switches -> https://www.mouser.com/ProductDetail/nk ... cycode=USD


Brian
by benewell
Thu Sep 06, 2018 12:59 pm
Forum: Build
Topic: MTC-MS-II Mid Side Matrix Construction Information
Replies: 24
Views: 105952

Re: MTC-MS-II Mid Side Matrix Construction Information

Thank you!

I was supposing more of an online "tech support" more than in person building :lol:
As building is more of a hobby, my limited expertise and days (weeks) of troubleshooting may not be suitable in the wild...
by benewell
Thu Sep 06, 2018 12:07 pm
Forum: Build
Topic: MTC-MS-II Mid Side Matrix Construction Information
Replies: 24
Views: 105952

Re: MTC-MS-II Mid Side Matrix Construction Information

Wow... Beautiful work, kudos Matty and Sylvain! I couldn't resist sharing as well. Thank you all for your help and guidance, It turned even out better than expected! I used the MTC-IGFO, MSII, and 2 Insert Switcher boards to create this Master Console, as well as a velleman K8042 kit for powering th...
by benewell
Sun Jun 03, 2018 11:30 am
Forum: Build
Topic: MTC-IGFO Mastering Transfer Console Input Gain Filter Output Construction Information
Replies: 22
Views: 91691

Re: MTC-IGFO Transfer Console Input Gain Filter Output Construction Information

Elma 04’s are very sensitive to overheating. If you end upbwith a noisy switch it’s damaged beyond repair. I’ve destroyed my share. It’s an expensive lesson. I think it’s worth the money to buy an unstuffed Goldpoimt if the potentiometer configuration works for the application. Thanks for the heads...
by benewell
Wed May 30, 2018 2:13 pm
Forum: Build
Topic: MTC-IGFO Mastering Transfer Console Input Gain Filter Output Construction Information
Replies: 22
Views: 91691

Re: MTC-IGFO Transfer Console Input Gain Filter Output Construction Information

You sure can use two rotary switches when all the filters are on one board. That's perfect, I'll plan to use two switches to handle this task! The thermal issue you might run into is the regulator heatsink. It depends on the relay voltage and unregulated relay supply. You can always use a 12 or 24V...
by benewell
Fri May 25, 2018 9:39 am
Forum: Build
Topic: MTC-IGFO Mastering Transfer Console Input Gain Filter Output Construction Information
Replies: 22
Views: 91691

Re: MTC-IGFO Transfer Console Input Gain Filter Output Construction Information

Misjah van der Heiden of 24mastering.com sent me pictures of his transfer console using 4X MTC-IGFO, 2X EEQ-12 and 2X Stereo Width Controller for modulation plus preview. Wow... Absolutely beautiful, that looks amazing! I was hoping to do something similar, by having two cut off filter selection kn...
by benewell
Tue Apr 17, 2018 10:53 am
Forum: Build
Topic: MTC-IGFO Mastering Transfer Console Input Gain Filter Output Construction Information
Replies: 22
Views: 91691

Re: MTC-IGFO Transfer Console Input Gain Filter Output Construction Information

Beautiful. Thank you for your reply! I was originally thinking of placing R13 before placing R11, and R12, and then laying those on top however, placing R11 and R12 then placing R10 and R13 over top as you mentioned makes it a little neater. I will most definitely continue to quadruple check as I go...
by benewell
Mon Apr 16, 2018 9:07 pm
Forum: Build
Topic: MTC-IGFO Mastering Transfer Console Input Gain Filter Output Construction Information
Replies: 22
Views: 91691

Re: MTC-IGFO Transfer Console Input Gain Filter Output Construction Information

Thank you for the Build Thread for the MTC-IGFO! I am currently making the gain switches, however I ran into a dilemma I was hoping to get clarification on. When connecting resistors, I noticed position 12 being particularly challenging to fit. Is it ok to place resistors as to how I have them place...
by benewell
Mon Apr 09, 2018 12:02 am
Forum: Build
Topic: MTC-MS-II Mid Side Matrix Construction Information
Replies: 24
Views: 105952

Re: MTC-MS-II Mid Side Matrix Construction Information

Thank you for the quick and thorough reply! I'll take your recommendation and get W2929 for the Tilt EQ, and use W2944 for Width and other audio connections. Although I am glad to hear the quad should work in short runs, I'd rather do it right. I'll also take your recommendation to use the anchored ...